Coolant Flush in Kemah

A coolant flush replaces the old coolant in your engine's cooling system with fresh coolant. Coolant, also called antifreeze, carries heat away from the engine and keeps it from freezing. It also has additives that protect the radiator, water pump and engine from corrosion, and those additives wear out over time.

Signs your coolant needs attention

• The temperature gauge runs higher than normal.
• The coolant looks rusty or cloudy, or has sludge in it.
• A sweet smell after driving.
• The heater doesn't blow hot.
• You have to top off the coolant often.

Coolant types matter

Coolants come in different formulas, and manufacturers specify which one your engine uses. Mixing types can reduce protection and, in some cases, cause sludge. We use the coolant your vehicle calls for.

How long coolant lasts

Older formulas often needed changing every 30,000 miles or so. Many modern long-life coolants go 100,000 miles or more before the first change. Your maintenance schedule has the interval.

How we handle it

We check the coolant's condition and look over the radiator, hoses, water pump and cap for leaks. If it's due, we replace the coolant and get the air out of the system. You get photos and a clear estimate before any work. Nothing gets done until you approve it.

Safety first: never open the radiator cap on a hot engine. The coolant is under pressure and can spray out scalding hot.